Filter
Top Products
144
Setup: Time Code, User Bit and CTL
*1: The internal TCG value is used when a signal cannot be detected from the TIME CODE IN connector input.
*2: The internal TCG value is used when the SLTC, SVITC and VITC cannot be detected on the input video signal.
*3: Nothing is recorded if the SVITC and VITC cannot be detected on the input video signal.
*4: In modes other than 59.94 Hz and 50 Hz, setup menu No. 507 EXT TC SEL does not appear. The unit is locked in SLTC in this mode.
*5: When setup menu No. 040 VFR REC is set to ON, REC RUN is selected regardless of the TCG switch setting.
TCG
switch
*5
Menu
*4
No. 507 EXT
TC SEL
Menu
No. 518 VITC
GEN
Selected video
input signal
Recorded time code
SBC area VAUX area
INT
(REGEN /
PRESET)
---
OFF
1394
Internal TCG value
Time code on IEEE1394 digital input
(VAUX area)
HD SDI SVITC on input video signal
*3
CMPST / SD SDI VITC on input video signal
*3
ON
1394
Time code on IEEE1394 digital input
(VAUX area)
HD SDI
Internal TCG value
CMPST / SD SDI
EXT
EXT_L
OFF
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI
Time code on TIME CODE IN
connector input
*1
SVITC on input video signal
*3
CMPST / SD SDI VITC on input video signal
*3
ON
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI
Time code on TIME CODE IN connector input
*1
CMPST / SD SDI
SLTC
OFF
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI SLTC on input video signal
*2
SVITC on input video signal
*3
CMPST / SD SDI VITC on input video signal
*2
VITC on input video signal
*3
ON
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI SLTC on input video signal
*2
CMPST / SD SDI VITC on input video signal
*2
SVITC
OFF
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI SVITC on input video signal
*2
SVITC on input video signal
*3
CMPST / SD SDI VITC on input video signal
*2
VITC on input video signal
*3
ON
1394
Time code on IEEE1394 digital input
(SBC area)
Time code on IEEE1394 digital input
(VAUX area)
HD SDI SVITC on input video signal
*2
CMPST / SD SDI VITC on input video signal
*2