Filter
Top Products
Setup: Item Settings
137
Setup
776 REF LEVEL
For AJ-HPM110P Specifies the standard level.
0: 20 dB
1: 18 dB
2: 12 dB
0000
0001
0002
FS-20
FS-18
FS-12
For AJ-HPM110E
0000
0001
0002
FS-20
FS-18
FS-12
777 CH2 MIC PWR
0000
0001
OFF
ON
Turns on and off the CH2 microphone power supply.
0: Does not use the microphone power supply.
1: Uses the jack switch to turn the microphone power supply on and off.
778 AUD OUT DLY
0000
0001
OFF
ON
Determines whether or not the output timing of analog audio output (including
headphones and monitor output) is delayed to synchronize it with SDI output.
0: Not delayed
The output is synchronized with LCD panel and monitor output.
1: Delayed
The output is synchronized with SDI output.
NOTE:
LCD panel and video monitor output is output about 66 msec earlier than SDI output.
785 PB MIX
0000
0001
OFF
ON
Sets a mix of analog and SDI audio output.
NOTE:
Press the STOP or SET button to open a subscreen and select the channels used in
mixing audio output. To exit the subscreen, press the STOP or SET button again.
Subscreen
01 PB CH1
0000
0001
0002
CH1
CH1+2
CH1+3
Specifies the playback channels that will be output via CH1.
02 PB CH2
0000
0001
0002
CH2
CH1+2
CH2+4
Specifies the playback channels that will be output via CH2
03 PB CH3
0000
0001
0002
CH3
CH3+4
CH1+3
Specifies the playback channels that will be output via CH3.
04 PB CH4
0000
0001
0002
CH4
CH3+4
CH2+4
Specifies the playback channels that will be output via CH4.
790 VOL SEL
0000
0001
CH1-4
CH1-8
Specifies operation of the recording level controls.
0: CH1 to CH4 only are variable, CH5 to CH8 are UNITY level.
1: In addition to CH1 to CH4, which are variable, CH5 to CH8 also become variable,
being linked to CH1 to CH4 operation.
792 A DUB CH
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4
Specifies tracks to be used for voice-overs.
793 A DUB PB MIX
0000
0001
OFF
ON
Specifies whether or not the playback sound be mixed in the voice-over.
0: Playback sound is not mixed.
1: The input and playback sound are mixed in the recording.
NOTE:
Press the STOP or SET button to open the subscreen to select the channels that will be
mixed. To exit the subscreen, press the STOP or SET button again.
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
23.98Hz 24Hz 59-23Hz 60-24Hz
only