Filter
Top Products
Setup: Item Settings
131
Setup
620
DOWNCON
MODE
0000
0001
0002
FIT_V
FIT_H
FIT_HV
Specifies the aspect ratio during down conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
621 UPCONV MODE
0000
0001
0002
FIT_V
FIT_H
FIT_HV
Specifies the aspect ratio during up conversion.
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and
vertical axis. (The aspect ratio may be distorted.)
626 D/C ENH H
0000
0001
0dB
+1dB
Specifies whether or not horizontal outlines be emphasized in down-conversion.
0: 0dB
1: +1dB
627 D/C ENH V
0000
0001
0dB
+1dB
Specifies whether or not vertical outlines be emphasized in down-conversion.
0: 0dB
1: +1dB
643 OUT MODE SEL
When set to 59.94 Hz,
29.97 Hz
Specifies the video signal output from the video output connector.
0: Switches output automatically depending on current recording and playback format.
1: 1080/59.94i or 1080/50i
2: 720/59.94p or 720/50p
3: 480/59.94i or 576/50i
NOTE:
When something other than AUTO is selected, a signal that differs from the recording
and playback format is automatically converted before output.
0000
0001
0002
0003
AUTO
1080i
720p
480i
When set to 50 Hz,
25 Hz, 60-25 Hz
0000
0001
0002
0003
AUTO
1080i
720p
576i
645 WIDE SELECT
0001
0002
WIDE
NORMAL
Specifies whether or not WIDE data be recorded when 480i or 576i is selected in menu
No. 020 SYS FORMAT.
1: Recorded
2: Not recorded
NOTE:
When 1394 is selected as the input signal, input data is recorded in its original form.
650 STYLE
0000
0001
CMPNT
CMPST
Sets the level adjustment mode.
0: Level adjustment mode for the component style
1: Level adjustment mode for the composite style
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
59.94Hz 50Hz 23.98Hz 29.97Hz 59-23Hz 25Hz
60-25Hz
only
59.94Hz 50Hz 23.98Hz 29.97Hz 59-23Hz 25Hz
60-25Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 50Hz
only