Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Command Parameters
show stp instance {<value 0-4>}
show stp mst_config id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Used to globally enable STP on the Switch.
Syntax enable stp
Description
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable STP, globally, on the Switch:
DES-3028P:4#enable stp
Command: enable stp
Success.
DES-3028P:4#
disable stp
Purpose
Used to globally disable STP on the Switch.
Syntax disable stp
Description
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable STP on the Switch:
DES-3028P:4#disable stp
Command: disable stp
Success.
DES-3028P:4#
config stp version
Purpose
Used to globally set the version of STP on the Switch.
Syntax config stp version [mstp | rstp | stp]
Description
This command allows the user to choose the version of the spanning tree
to be implemented on the Switch.
Parameters
mstp – Selecting this parameter will set the Multiple Spanning Tree
Protocol (MSTP) globally on the Switch.
rstp - Selecting this parameter will set the Rapid Spanning Tree Protocol
70