Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Success.
DES-3028P:4#
To delete a member:
DES-3028P:4# config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK...
Success.
DES-3028P:4#
config sim
Purpose Used to configure role parameters for the SIM protocol on the Switch.
Syntax
config sim [[commander {group_name <groupname 64>} |
candidate] | dp_interval <sec 30-90> | hold_time <sec 100-255>}]
Description This command is used to configure parameters of switches of the SIM.
Parameters commander – Use this parameter to configure the commander switch
(CS) for the following parameters:
candidate – Used to change the role of a CS (commander) to a CaS
(candidate).
Restrictions Only administrator-level users can issue this command.
dp_interval <30-90> – The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery
packets. Returning information to the CS will include
information about other switches connected to it. (Ex. MS,
CaS). The user may set the dp_interval from 30 to 90 seconds.
hold time <100-255> – Using this parameter, the user may set
the time, in seconds, the Switch will hold information sent to it
from other switches, utilizing the discovery interval protocol.
The user may set the hold time from 100 to 255 seconds.
Example usage:
To change the time interval of the discovery protocol:
DES-3028P:4# config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DES-3028P:4#
225