Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
802.1X : Enabled
Authentication Mode : Port_based
Authentication Protocol : Radius_Eap
Port number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show 802.1x auth_state
Purpose Used to display the current authentication state of the 802.1x server
on the Switch.
Syntax
show 802.1x auth_state {ports <portlist>}
The show 802.1x auth_state command is used to display the
current authentication state of the 802.1x Port-based or MAC-based
Network Access Control server application on the Switch.
ports <portlist> − Specifies a port or range of ports to be viewed.
The following details what is displayed:
Port number − Shows the physical port number on the Switch.
Auth PAE State: Initalize / Disconnected / Connecting /
Authenticating / Authenticated / Held / ForceAuth / ForceUnauth −
Shows the current state of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initalize / Success /
Timeout − Shows the current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized − Shows the result of the
authentication process. Authorized means that the user was
authenticated, and can access the network. Unauthorized means
that the user was not authenticated, and cannot access the network.
Restrictions None.
Description
Parameters
Example usage:
To display the 802.1x auth state for Port-based 802.1x:
136