Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
DES-3028P:4#
config log_save_timing
Purpose Used to configure the method of saving log files to the switch’s flash
memory.
Syntax
config log_save_timing [time_interval <min 1-65535> |
on_demand | log_trigger]
Description The config log_save_timing command allows the user to
configure the time method used in saving log files to the switch’s
flash memory.
Parameters time_interval <min 1-65535> - Use this parameter to configure the
time interval that will be implemented for saving log files. The log
files will be save every x number of minutes that are configured
here.
on_demand - Users who choose this method will only save log files
when they manually tell the Switch to do so, using the save or save
log command.
log_trigger - Users who choose this method will have log files saved
to the Switch every time a log event occurs on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the time interval as every 30 minutes for saving log files:
DES-3028P:4#config log_save_timing time_interval 30
Command: config log_save_timing time_interval 30
Success.
DES-3028P:4#
show log_save_timing
Purpose Used to display the method configured for saving log files to the
switch’s flash memory.
Syntax
show log_save_timing
Description The show log_save_timing command allows the user to view the
time method configured for saving log files to the switch’s flash
memory.
Parameters None.
Restrictions None.
67