Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Note: To configure the SSH user, the administrator must create a user
account on the Switch. For information concerning configuring a user
account, please see the section of this manual entitled Basic Switch
Commands and then the command, create account.
config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour |
blowfish | cast128 | twofish128 | twofish192 | twofish256 | MD5 | SHA1 |
RSA | DSA] [enable | disable]
This command allows users to configure the desired type of SSH algorithm
used for authentication encryption.
Parameters 3DES – This parameter will enable or disable the Triple_Data Encryption
Standard encryption algorithm.
AES128 - This parameter will enable or disable the Advanced Encryption
Standard AES128 encryption algorithm.
AES192 - This parameter will enable or disable the Advanced Encryption
Standard AES192 encryption algorithm.
AES256 - This parameter will enable or disable the Advanced Encryption
Standard AES256 encryption algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption
algorithm.
blowfish - This parameter will enable or disable the Blowfish encryption
algorithm.
cast128 - This parameter will enable or disable the Cast128 encryption
algorithm.
twofish128 - This parameter will enable or disable the twofish128 encryption
algorithm.
twofish192 - This parameter will enable or disable the twofish192 encryption
algorithm.
MD5 - This parameter will enable or disable the MD5 Message Digest
encryption algorithm.
SHA1 - This parameter will enable or disable the Secure Hash Algorithm
encryption.
RSA - This parameter will enable or disable the RSA encryption algorithm.
DSA - This parameter will enable or disable the Digital Signature Algorithm
encryption.
[enable | disable] – This allows the user to enable or disable algorithms
entered in this command, on the Switch.
Restrictions Only administrator-level users can issue this command.
Description
Usage example:
To configure SSH algorithm:
DES-3028P:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
Success.
DES-3028P:4#
211