Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DES-3028P:4#
show iproute
Purpose Used to display the Switch’s current IP routing table.
Syntax
show iproute {<network_address> | static}
Description This command will display the Switch’s current IP routing table.
Parameters <network_address> - The network IP address.
static – Select a static IP route.
Restrictions None.
Example usage:
To display the contents of the IP routing table:
DES-3028P:4#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
0.0.0.0 10.1.1.254 System 1 Default
10.0.0.0/8 10.48.74.122 System 1 Local
Total Entries: 2
DES-3028P:4#
181