Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
To change the hold time of the discovery protocol:
DES-3028P:4# config sim hold_time 120
Command: config sim hold_time 120
Success.
DES-3028P:4#
To transfer the CS (commander) to be a CaS (candidate):
DES-3028P:4# config sim candidate
Command: config sim candidate
DES-3028P:4#
Success.
To transfer the Switch to be a CS:
DES-3028P:4# config sim commander
Command: config sim commander
Success.
DES-3028P:4#
To update the name of a group:
DES-3028P:4# config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3028P:4#
download sim
Purpose Used to download firmware or configuration file to an indicated device.
Syntax
download sim_ms [firmware_from_tftp | configuration_from_tftp]
<ipaddr> <path_filename> {members <mslist 1-32> | all}
Description This command will download a firmware file or configuration file to a
specified device from a TFTP server.
Parameters firmware – Specify this parameter to download firmware to members of a
SIM group.
configuration - Specify this parameter to download a switch configuration
to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which the
user prefers to download firmware or switch configuration files. The user
may specify a member or members by adding one of the following:
<mslist> - Enter a value, or values to specify which members of
the SIM group will receive the firmware or switch configuration.
all – Add this parameter to specify all members of the SIM group
will receive the firmware or switch configuration.
226