Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
create cpu access_profile
• src_port_mask <hex 0x0-0xffff> − Specifies a UDP port mask for the source port.
• dst_port_mask <hex 0x0-0xffff> − Specifies a UDP port mask for the destination port.
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify the CPU access
profile to be created with this command.
• protocol_id_mask <hex 0x0-0xffffffff> − Specifies that the Switch will examine each frame’s
Protocol ID field using the hex form entered here.
• user_define_mask <hex 0x0-0xffffffff> − Specifies that the rule applies to the IP protocol
ID and the mask options behind the IP header.
• packet_content_mask – Specifies that the Switch will mask the packet header beginning
with the offset value specified as follows:
• offset_0-15 - Enter a value in hex form to mask the packet from byte 0 to byte 15.
• offset_16-31 - Enter a value in hex form to mask the packet from byte 16 to byte 31.
• offset_32-47 - Enter a value in hex form to mask the packet from byte 32 to byte 47.
• offset_48-63 - Enter a value in hex form to mask the packet from byte 48 to byte 63.
• offset_64-79 - Enter a value in hex form to mask the packet from byte 64 to byte 79.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a CPU access profile:
DES-3028P:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DES-3028P:4#
delete cpu access_profile
Used to delete a previously created CPU access profile.
Syntax
delete cpu access_profile profile_id <value 1-3>
Description The delete cpu access_profile command is used to delete a previously created
CPU access profile.
Parameters
profile_id <value 1-3> − Enter an integer between 1 and 3 that is used to identify
the CPU access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the create cpu access_profile command.
Restrictions Only administrator-level users can issue this command.
Purpose
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-3028P:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3028P:4#
159