Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
create access_profile
protocol_id_mask − Specifies that the Switch will examine the protocol field in each packet and
if this field contains the value entered here, apply the following rules.
packet_content_mask – Specifies that the Switch will mask the packet header beginning with
the offset value specified as follows:
•
•
•
•
•
offset_0-15 – Enter a value in hex form to mask the packet from the beginning of the
packet to the 15
th
byte.
profile_id <value 1-256> − Sets the relative priority for the profile. Priority is set relative to other
profiles where the lowest profile ID has the highest priority. The user may enter a profile ID
number between 1 to 256.
Restrictions Only administrator-level users can issue this command.
offset_16-31 – Enter a value in hex form to mask the packet from byte 16 to byte 31.
offset_32-47 – Enter a value in hex form to mask the packet from byte 32 to byte 47.
offset_48-63 – Enter a value in hex form to mask the packet from byte 48 to byte 63.
offset_64-79 – Enter a value in hex form to mask the packet from byte 64 to byte 79.
Example usage:
To create an access list rules:
DES-3028P:4#create access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp profile_id 101
Command: create access_profile ip vlan source_ip_mask 20.0.0.0 destination_ip_mask
10.0.0.0 dscp icmp permit profile_id 101
Success.
DES-3028P:4#
delete access_profile
Purpose Used to delete a previously created access profile.
Syntax
delete access_profile [profile_id <value 1-256>]
Description The delete access_profile command is used to delete a previously
created access profile on the Switch.
Parameters
profile_id <value 1-256> − Enter an integer between 1 and 256 that
is used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command. The user may
enter a profile ID number between 1 and 256.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DES-3028P:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DES-3028P:4#
154