Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
enable 802.1x
Used to enable the 802.1x server on the Switch.
Syntax
enable 802.1x
Description The enable 802.1x command enables the 802.1x Network Access
control server application on the Switch. To select between port-based
or MAC-based, use the config 802.1x auth_mode command.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Purpose
Example usage:
To enable 802.1x switch wide:
DES-3028P:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3028P:4#
disable 802.1x
Purpose Used to disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description The disable 802.1x command is used to disable the 802.1x Network
Access control server application on the Switch.
Only administrator-level users can issue this command.
Parameters None.
Restrictions
Example usage:
Command: disable 802.1x
To disable 802.1x on the Switch:
DES-3028P:4#disable 802.1x
Success.
DES-3028P:4#
134