Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config snmp system_name
Purpose Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description The config snmp system_name command configures the name of
the Switch.
Parameters
DES-3028P:4#config snmp system_name DES-3028P Switch
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch name for “DES-3028P Switch”:
Command: config snmp system_name DES-3028P Switch
DES-3028P:4#
enable rmon
Success.
Purpose Used to enable RMON on the Switch.
Syntax
enable rmon
Description This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable RMON:
DES-3028P:4#enable rmon
Command: enable rmon
Success.
DES-3028P:4#
disable rmon
Purpose Used to disable RMON on the Switch.
Syntax
disable rmon
Description This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
47