Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config authen application
configured method list. Enter a alphanumeric string of up to 15
characters to define a previously configured method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the default method list for the web interface:
DES-3028P:4#config authen application http login default
Success.
Command: config authen application http login default
DES-3028P:4#
show authen application
Purpose Used to display authentication methods for the various applications
on the Switch.
Syntax
show authen application
Description This command will display all of the authentication method lists (login,
enable administrator privileges) for Switch configuration applications
(console, telnet, SSH, web) currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the login and enable method list for all applications on the Switch:
DES-3028P:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
----------------- ------------------ ------------------------
Console default default
Telnet Trinity default
SSH default default
HTTP default default
DES-3028P:4#
create authen server_host
Purpose Used to create an authentication server host.
Syntax
create authen server_host <ipaddr> protocol [tacacs | xtacacs |
tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> | none] |
timeout <int 1-255> | retransmit < 1-255>}
Description This command will create an authentication server host for the
TACACS/XTACACS/TACACS+/RADIUS security protocols on the Switch.
When a user attempts to access the Switch with authentication protocol
enabled, the Switch will send authentication packets to a remote
TACACS/XTACACS/TACACS+/RADIUS server host on a remote host.
The TACACS/XTACACS/TACACS+/RADIUS server host will then verify
or deny the request and return the appropriate message to the Switch.
196