Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#show 802.1x auth_state
Command: show 802.1x auth_state
3 ForceAuth Success Authorized
Port Auth PAE State Backend State Port Status
------ ----------------------- --------------------- -----------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
6 ForceAuth Success Authorized
7 ForceAuth Success Authorized
8 ForceAuth Success Authorized
9 ForceAuth Success Authorized
10 ForceAuth Success Authorized
11 ForceAuth Success Authorized
12 ForceAuth Success Authorized
13 ForceAuth Success Authorized
14 ForceAuth Success Authorized
15 ForceAuth Success Authorized
16 ForceAuth Success Authorized
17 ForceAuth Success Authorized
18 ForceAuth Success Authorized
19 ForceAuth Success Authorized
20 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
Example usage:
To display the 802.1x auth state for MAC-based 802.1x:
DES-3028P:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number : 1:1
Index MAC Address Auth PAE State Backend State Port Status
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
2
3
4
5
6
7
8
11
13
9
10
12
14
15
16
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
config 802.1x auth_mode
Purpose Used to configure the 802.1x authentication mode on the Switch.
Syntax
config 802.1x auth_mode {port_based | mac_based]
Description The config 802.1x auth_mode command is used to enable either
the port-based or MAC-based 802.1x authentication feature on the
Switch.
137