Filter
Top Products
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
enable clipaging
Purpose
Used to pause the scrolling of the console screen when a command
displays more than one page.
Syntax enable clipaging
Description
This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-3028P:4#enable clipaging
Command: enable clipaging
Success.
DES-3028P:4#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
Syntax disable clipaging
Description
This command is used to disable the pausing of the console screen
at the end of each page when a command would display more than
one screen of information.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3028P:4#disable clipaging
Command: disable clipaging
Success.
DES-3028P:4#
enable telnet
Purpose
Used to enable communication with and management of the Switch
using the Telnet protocol.
Syntax enable telnet <tcp_port_number 1-65535>
Description
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535> − The TCP port number. TCP ports
b d b t 1 d 65535 Th “ ll
k”TCPtf
15