Filter
Top Products
82
DISPLAY Menu screens
The DISPLAY menu consists of 2 screens (1/2 and 2/2)
Item Setting Description
LCD BRIGHT-
NESS
LCD CHROMA
LCD CONTRAST
LCD AUTO OFF
DISPLAY
COUNTER
POSI.
NEXT PAGE
PAGE BACK
MAX
+4
+3
+2
+1
ⅷ 0
–1
–2
–3
–4
MIN
OFF
ⅷ 30MIN
1HOUR
2HOUR
OFF
ⅷ ON
AUTO
ⅷ LOWER-R
LOWER-L
UPPER-R
UPPER-L
CENTER
Ⅵ DISPLAY (1/2) Menu screen
MENU SCREENS
– Description of the Menu screens – (continued)
For adjusting the brightness of the LCD.
A bigger value increases brightness.
For adjusting the concentration level of the color of the LCD.
A bigger value increases color concentration.
For adjusting the LCD contrast.
A bigger value increases contrast.
For selecting whether to turn off the LCD display automatically
when it is not to be used for a long time.
OFF : No auto OFF
30MIN : Auto OFF after 30 minutes
1HOUR : Auto OFF after 1 hour
2HOUR : Auto OFF after 2 hours
Memo
During recording or playback, the LCD display stays on regard-
less of this setting.
For turning on/off on-screen status display on the monitor con-
nected to the VIDEO MONITOR OUT terminal or the LCD.
OFF : No on-screen status display. Only video is dis-
played.
ON : Always shows on-screen status display.
AUTO : Shows on-screen status display for about 4 sec-
onds during mode changes.
For selecting the counter display position (CTL counter, time code
and user’s bit) of the monitor or the LCD.
LOWER-R : Lower right
LOWER-L : Lower left
UPPER-R :Upper right
UPPER-L : Upper left
CENTER :Center
For displaying the DISPLAY (2/2) Menu screen.
For returning to the TOP MENU screen.
81
Ⅵ
TC/UB/CLOCK (2/2) Menu screen
Item Setting Description
U-BIT (PAL)
DATE REC
CLOCK
ADJUST
PAGE BACK
OFF
ⅷ
ON
ⅷ OFF
ON
For selecting whether to record user’s bit. (Only for E model)
OFF : No recording
ON : Recording
For selecting whether to record date/time data on the tape.
OFF : No recording
ON : Recording date/time on-screen display descrip-
tion.
For this to be enabled, the following settings are required.
• Set DISPLAY in the DISPLAY (1/2) Menu screen to ON.
• Set TIME/DATE in the DISPLAY (2/2) Menu screen to other
than OFF.
Memo
With DV signal input, date/time data are not recorded.
For displaying the date/time setting screen
For setting, refer to page 40 “Setting date/time”.
For returning to the TC/UB/CLOCK(1/2) Menu screen .