Filter
Top Products
79
VIDEO Menu screen
Item Setting Description
ⅷ Y/C
COMPONENT
ⅷ OFF
ON
ⅷ OFF
ON
VIDEO
INPUT SEL
SET UP
(NTSC)
BLACK
BURST
PAGE BACK
For selecting the input video signals when the INPUT SELECT
switch on the front panel is set to Y/C (CPN).
Y/C : YC separate signals
COMPONENT: Component video signals
For enabling/disabling the application of setups to analog video
signals (composite, Y/C and component).
(During recording and playback)
OFF : Does not apply setups.
ON : Applies setups.
Memo
The application of setups on playback or recorded video signals
must match the setting of SET UP. Otherwise, if dubbing is re-
peatedly performed, the hue and brightness of the video may not
appear normal.
For enabling/disabling output of black burst signals of the built-in
signal generator.
OFF : Output off
ON : Output on. In the RECORDING mode, black burst
signals will be recorded.
For returning to the TOP MENU screen.
80
Item Setting Description
TCG SOURCE
TCG SELECT
TCG MODE
NDF/DF
(NTSC)
DF BIT (PAL)
TC DUPLICATE
TC OFFSET
NEXT BACK
PAGE BACK
ⅷ INTERNAL
EXTERNAL
PRESET
ⅷ REGEN
ⅷ REC-RUN
FREE-RUN
NON DROP
ⅷ DROP
ⅷ OFF
ON
ⅷ OFF
AUTO
NON DROP
ⅷ OFF
+1F
+2F
–2F
–1F
For selecting the source of the time code generator.
INTERNAL : BR-DV6000 built-in time code generator
EXTERNAL : Time code generator connected to the TIME
CODE IN terminal
For selecting the time code generator mode.
PRESET : PRESET mode
REGEN : REGENERATION mode.
For selecting the running mode of the time code generator.
* Select here in the PRESET mode.
REC-RUN : RECORD RUN mode.
FREE-RUN : FREE RUN mode
For selecting the framing mode of the time code generator. (NTSC
only)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP : DROP-FRAME mode
For selecting whether to record drop-frame bits. (Only for E model)
OFF : No recording
ON : Recording
For selecting the type of time code to be recorded with DV signal
input.
OFF : Records time code of the built-in time code gen-
erator of BR-DV6000
AUTO : Records the time code input to the DV IN termi-
nal. The framing mode of the time code will be set
automatically to the framing of the time code in-
put.
NON DROP : Records the time code input to the DV IN termi-
nal. The framing mode of the time code is fixed to
non-drop framing. (NTSC only)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (NTSC only)
For setting up the timing when time code data from the 9-PIN
REMOTE terminal of BR-DV6000 to the editing remote controller
are output.
OFF : Normal setting
+1F : Sets the timing to 1 frame faster
+2F : Sets the timing to 2 frames faster
–2F :Sets the timing to 2 frames slower.
–1F :Sets the timing to 1 frames slower
For displaying the TC/UB/CLOCK (2/2) Menu screen.
For returning to the TOP MENU screen.
Ⅵ TC/UB/CLOCK (1/2) Menu screen
TC/UB/CLOCK Menu screens
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
MENU SCREENS
– Description of the Menu screens – (continued)