Filter
Top Products
57
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV
IN/OUT
IN OUT
OFF
AUDIO
REMOTE2
IN
B-YR-Y
SYNC IN
TIME CODE
IN OUT
Y
COMPONENT
OUT
CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT
REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE
SINGLE
GND
Y/C
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV
IN/OUT
IN OUT
OFF
AUDIO
REMOTE2
IN
B-YR-Y
SYNC IN
TIME CODE
IN OUT
Y
COMPONENT
OUT
CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT
REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE
SINGLE
GND
Y/C
FFOYALEDETACILPER
LAIRESNOITACILPER
NOETIRWXEDNI
FFOEPOEDOMNICD
––––––]2/2[METSYS–––
KCABEGAP
000000RETEMRUOHMURD
LECNACGNITTESYROTCA
CSTNNIVD/BP
F
SYSTEM (2/2) Menu screen
PLAYBACK
– Dubbing with another machine using the
SERIAL REMOTE OUT/DV terminals –
When the REPLICATION function is turned ON and BR-DV6000 is set to the PLAYBACK mode,
the REC command will output from the SERIAL REMOTE OUT terminal or the DV terminal. With
this function, the video and sound being played back on BR-DV6000 can be dubbed by another
machine by simply pressing the PLAY button.
Ⅵ
For recording analog video and audio signal, use the SERIAL REMOTE OUT terminal.
Memo
For information on connec-
tion with the SERIAL RE-
MOTE OUT terminal:
(
☞
Page 34)
Ⅵ
For recording digital video and audio signals, use the DV terminal.
::Setting:
Ⅵ BR-DV6000
● For using the DV terminal, set BACKUP REC TIME in the
SYSTEM (1/2) menu screen to “OFF”.
● Set the items in the SYSTEM (2/2) Menu screen.
• Set REPLICATION to SERIAL or DV depending on the terminal.
• To delay the output timing for the REC command in the PLAY-
BACK mode, set REPLICATE DELAY (OFF, 1 - 5 seconds).
If the DV terminal is to be used, set REPLICATE DELAY to a
larger value.
Ⅵ Dubbing machine
• When the SERIAL terminal is to be used, select the mode that
can receive commands of the SERIAL (IN) terminal.
• When the DV terminal is to be used, select the DV input mode.
::Operation:
1.
Load a tape for playback into BR-DV6000 and a tape for re-
cording into the dubbing machine.
2.
Press the PLAY button to set BR-DV6000 into the PLAYBACK
mode.
• The unit outputs the REC command from the SERIAL REMOTE
OUT terminal or the DV terminal and the dubbing machine starts
recording.
3.
To stop recording, press the STOP button of the dubbing ma-
chine.
4.
To exit from the REPLICATION mode, set REPLICATION to OFF.
BR-DV6000
Analog video/audio signals
Dubbing
machine
SERIAL REMOTE OUT terminal
REC
command
SERIAL (IN) terminal
Digital video/audio signals
Dubbing machine
DV
terminal
REC command
BR-DV6000
Memo
With the DV terminal in use,
this function and the
backup recording function
cannot be operated at the
same time.
DV
terminal
56
OFF
TIMER
REC PLAY
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV
IN/OUT
IN OUT
OFF
AUDIO
REMOTE2
IN
B-YR-Y
SYNC IN
TIME CODE
IN OUT
Y
COMPONENT
OUT
CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT
REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE
SINGLE
GND
Y/C
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET INDEX+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
INDEX–
Mini
CH1/3
NDF
12
H
34
M
34
S
10
F
FREE
CH2/4
STOP
SP222
min
01/02/03
01:23:45 INS
AM
OVER
48k
T
C
L
dB010203040
OVER
W
Y/C
VA
SYNC
r
e
CF
Memo
Use an external timer ex-
clusively to control the VCR
operation.
If the power is cut off by an
external timer and the VCR
operation stopped while the
tape is running, BR-
DV6000 or the tape may be
damaged.
PLAYBACK
– External timer playback –
The unit can start playing automatically when the power is supplied. Using a commercially avail-
able timer, playback can start at a pre-determined time.
DISP button
LCD Display
Timer symbol
Ⅵ Connect the supplied AC adapter.
To set the power supply power to be activated by a timer, plug the
power cord of the AC adapter to the power output terminal of the
timer.
1.
Load the tape for playback.
2.
With REPEAT MODE in the SYSTEM (1/2) Menu screen, whether
to enable/disable repeat playback, and the type of repeat play-
back, can be selected.
3.
Set the TIMER switch on the rear panel to “PLAY”.
If the DISP button on the front panel is pressed
to change the LCD display to the enlarged
mode, the timer symbol lights up in green.
4.
Set up the time, etc., of the external timer.
When the power is supplied to the unit, playback starts automati-
cally. If the repeat playback mode is selected, repeat playback is
executed.
5.
To stop playback, press the STOP button.
6.
To stop the external timer playback mode, set the TIMER switch
to “OFF”.
The timer symbol of the LCD disappears.
Supplied AC adapter
Timer
DC IN
terminal
TIMER switch