Filter
Top Products
60
Time codes can be recorded with the following ways.
• Record it from preset data.
• Record it following the one last recorded on the tape.
• Record the time code, which is input to the DV IN/OUT terminal.
• Record the time code from an external time code generator.
TC/UB/CLOCK(1/2) Menu screen
KCABEGAP
EGAPTXEN
FFOTESFFOCT
FFOETACILPUDCT
–––)LAP(TIBFD
PORD)CSTN(FD/FDN
NUR-CEREDOMGCT
TESERPTCELESGCT
LANRETNIECRUOSGCT
––)–2/1(KCOLC/BU/CT–––
BR-DV6000
PROFESSIONAL
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
Recording from preset data
Record preset time code data to the inter
nal time code generator in the TIME CODE Preset screen.
REC button
COUNTER switch
:Setting:
● Set the TC/UB/CLOCK(1/2) Menu as follows.
TCG SOURCE : INTERNAL
TCG SELECT : PRESET
TCG MODE : REC RUN or FREE RUN
NDF/DF (NTSC) : NON DROP or DROP frame mode.
:Operation:
1.
Check the preset time code.
1 Set the COUNTER switch to TC or UB.
2 In the STOP mode, hold down the REC button.
¥ The preset time code or the user
’s bit is displayed on the
monitor or the LCD. The counter mode is displayed as TCG
or UB.
3 When the REC button is released, it returns to the original
display.
2.
Record.
Press the PLAY button while holding down the REC button.
¥ The time code and user
’s bit are recorded.
To stop recording, press the STOP button.
TIME CODE
– Recording the time code –
Preset time code
● Stopping the power supply to the DV IN terminal of BR-DV6000 cancels the preset value of the time code
generator.
● With FREE RUN, if the mode is changed from OPERATE ON to OPERATE OFF and back to OPERATE
ON before BR-DV6000 is restarted, the advance of the time generator may deviate. Do not change the
mode to OPERATE OFF to keep the time generator data agreed with those of other machines.
E-60
Time codes can be recorded with the following ways. Whether to record user
’s bit can be selected
with U-BIT in the TC/UB/CLOCK (2/2) Menu screen.
• Record it from preset data.
• Record it following the one last recorded on the tape.
• Record the time code, which is input to the DV IN/OUT terminal.
• Record the time code from an external time code generator.
TC/UB/CLOCK(1/2) Menu screen
KCABEGAP
EGAPTXEN
FFOTESFFOCT
FFOETACILPUDCT
NO)LAP(TIBFD
–––)CSTN(FD/FDN
NUR-CEREDOMGCT
TESERPTCELESGCT
LANRETNIECRUOSGCT
––)–2/1(KCOLC/BU/CT–––
BR-DV6000
PROFESSIONAL
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOR OUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
Recording from preset data
Record preset time code data to the inter
nal time code gener
ator in the TIME CODE Preset screen.
REC button
COUNTER switch
:Setting:
● Set the TC/UB/CLOCK(1/2) Menu as follows.
TCG SOURCE : INTERNAL
TCG SELECT : PRESET
TCG MODE : REC RUN or FREE RUN
:Operation:
1.
Check the preset time code.
1 Set the COUNTER switch to TC or UB.
2 In the STOP mode, hold down the REC button.
¥ The preset time code or the user
’s bit is displayed on the
monitor or the LCD. The counter mode is displayed as TCG
or UB.
3 When the REC button is released, it returns to the original
display.
2.
Record.
Press the PLAY button while holding down the REC button.
¥ The time code and user
’s bit are recorded.
To stop recording, press the STOP button.
TIME CODE
– Recording the time code –
Preset time code
● Stopping the power supply to the DV IN terminal of BR-DV6000 cancels the preset value of the time code
generator.
● With FREE RUN, if the mode is changed from OPERATE ON to OPERATE OFF and back to OPERATE
ON before BR-DV6000 is restarted, the advance of the time generator may deviate. Do not change the
mode to OPERATE OFF to keep the time generator data agreed with those of other machines.
E
U