Filter
Top Products
72
MENU SCREENS
– Description of the Menu screens –
In the following description of the Menus, ⅷ indicates factory settings.
TOP MENU screen
Item Setting Description
SYSTEM
REMOTE
AUDIO
VIDEO
TC/UB/CLOCK
DISPLAY SET
NETWORK
PACK CONFIG
MOVIE CLIP
EXIT
Displays the menus related to the operating system of BR-DV6000.
It also displays factory setting and the drum hour meter.
Displays the menus related to the remote controller.
Displays the menus related to the audio.
Displays the menus related to the video.
Displays the menu for setting time codes.
Also displays the date/time setting screen.
Displays the menus related to the monitor connected to the VIDEO
MONITOR OUT terminal and the LCD.
Displayed if the network board SA-DV6000 (sold separately) is
installed.
For details, refer to the user’s guide for SA-DV6000.
Return to the normal screen.
SYSTEM Menu screens
The SYSTEM Menu consists of the following two screens (1/2 and 2/2).
Ⅵ REMOTE (1/2) menu
Item Setting Description
SYNC SELECT
STL/F.ADV
MODE
ⅷ AUTO
EXTERNAL
FIELD
1ST
ⅷ 2ND
FRAME
Use this item to select the synchronization signal if there is no
input of synchronization signal to the SYNC IN terminal during
playback.
AUTO : Input video signal
EXTERNAL : Internal synchronization signal
(For details :
☞
Page 29)
Use this setting to select the still image for the STILL mode or
frame-advance playback.
FIELD : Displays the field image. During frame-advance
playback, it displays the 1st and 2nd field images
alternately.
1ST : Displays the 1st field image.
2ND : Displays the 2nd field image.
FRAME : Displays the frame image.
Memo
Images from the DV terminal will be the 2nd field images regard-
less of the settings.
—
—
—
—
—
—
—
—
—
73
Item Setting Description
BACKUP REC
TIME
LONG PAUSE
TIME
LONG PAUSE
MODE
;,: KEY
FUNC.
REPEAT MODE
NEXT PAGE
PAGE BACK
ⅷ OFF
25MIN
55MIN
75MIN
115MIN
175MIN
265MIN
30SEC
1MIN
2MIN
3MIN
ⅷ 5MIN
ⅷ F.ADV
STBY-OFF
INDEX
ⅷ VAR
ⅷ OFF
INDEX
VIDEO OUT
TAPE END
SYSTEM Menu screens (continued)
For setting backup recording time with DV input signals accord-
ing to the tape length of the source unit:
OFF : No backup recording
25MIN : For a 30-minute source unit recording tape
55MIN : For a 60-minute source unit recording tape
75MIN : For a 80-minute source unit recording tape
115MIN : For a 120-minute source unit recording tape
175MIN : For a 180-minute source unit recording tape
265MIN : For a 270-minute source unit recording tape
(
☞
Page 45 “Backup recording function”)
Memo
● This item is fixed to OFF when REPLICATION in the SYSTEM
(2/2) Menu screen is set to DV. If this is set to other than OFF,
REPLICATION cannot be set to DV.
● Set this item to “OFF” if DV REC TRIGGER of GY-DV5000 is set to
ON.
Select the time when BR-DV6000 enters the TAPE PROTEC-
TION mode if the unit has stayed at still, stop or recording pause
for a prolonged period of time. The TAPE PROTECTION mode in
at STILL can be selected from LONG PAUSE MODE:
30SEC: 30 seconds
1MIN : 1 minute 3MIN : 3 minutes
2MIN : 2 minutes 5MIN : 5 minutes
Memo
To prevent the video head from clogged or the tape from being
damaged, set as short a time as possible.
For selecting the action when BR-DV6000 stays at still for a long
time.
In the case of RECORDING PAUSE or STOP, it enters the
standby-off status:
F.ADV : Frame-advances BR-DV6000 five times in the for-
ward direction. On the 6th attempt, this mode
stops it.
STBY-OFF : Stops BR-DV6000.
For selecting the function for the INDEX+/:
button and INDEX–
/
; button.
INDEX : Performs index search. (
☞
Page 52)
VAR : Changes the search speed during a search.
(
☞
Page 50)
For enabling/disabling repeat playback and selecting the type of
repeat playback.
OFF : No repeat playback
INDEX : Repeat playback between the positions where
index signals are recorded.
VIDEO END : Repeat playback from the beginning of the tape
to the position where video signal recording ends.
TAPE END : Repeat playback from the beginning to the end of
the tape.
For displaying the SYSTEM (2/2) Menu screen.
For returning to the TOP MENU screen.