Filter
Top Products
65
Note for audio insert editing (48 kHz/32 kHz mode)
●
If the audio mode setting by menu on BR-DV6000 (audio mode of input signal in DV interface) is
different from that of audio mode of the recorded tape, insert editing is impossible. (If editing is
performed, it will automatically stop.)
●
If the audio mode is changed during performing audio insert editing,
• In case of DV interface editing, editing will be continued in accordance with the changed audio
mode.
• In case of analog interface editing, if the audio mode of the recorded tape is changed from 32 kHz
mode to other mode, editing will automatcically stop during CH1/2 or CH3/4 audio insert editing.
• In case of analog interface editing, editing will be continued in accordance with the audio mode
setting by menu on BR-DV6000 during CH1/2/3/4 simultaneous audio insert editing or assemble
editing even if the audio mode of the recorded tape is changed.
3) Editing over recorded tape with 48kHz or
44.1 kHz audio in DV interface
4) Editing over recorded tape with 32kHz au-
dio in DV interface
ASSEM
ASSEM
INS V
INS VA
INS A
INS A1
INS A2
INS TC
INS VA1
INS VA2
VIDEO
VIDEO
AUD-1
AUD-2
AUD-1
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
AUD-1
AUD-2
TC
*
*
*
*
Edit mode DV editing
Mode select OSD
48 kHz/44.1 kHz mode
Yes
Yes
Yes
Yes
No
No
No
No
No
ASSEM
ASSEM
INS V
INS VA
INS A
INS A12
INS A34
INS TC
INS VA12
INS VA34
VIDEO
VIDEO
AUD-1
AUD-2
AUD-1
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
AUD-1
AUD-2
TC
*
*
*
*
Edit mode DV editing
Mode select OSD 32 kHz mode
Yes
Yes
Yes
Yes
No
No
No
No
No
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
Ⅵ Following editing mode is not available
• Variable motion editing
• Slow motion editing
• Audio or Video split editing
• Frame by frame editing (if editing of duration of less than 10 frames, it will automatically perform 10
frames editing)
• CTL editing (Editing may be possible in CTL mode, but since counter data cannot be coincided with
tape position, editing accuracy will become worse.
64
BR-DV6000 is designed to be capable to make tape-to-tape editing by RM-G800/G805 JVC bus
remote controller or RM-G820 as well as other equivalent RS-422 remote controller. Of course, it
can be applied to feeder player.
• +/– 0 frame editing accuracy with time code, capstan bump (for both recorder and player) and external
sync by RS-422 editing controller.
• Ready for A/B roll editing.
• Digital editing via DV interface.
Ⅵ
Chart for editing mode when BR-DV6000 is used as editing recorder
1) Editing over recorded tape with 48kHz au-
dio in analog interface
2) Editing over recorded tape with 32 kHz au-
dio in analog interface
* : In this mode, even when you start auto edit,
editing will automatically stop and warning
message will appear. But, preview edit will be
performed without any warning message.
*
2
: In case of CH1/CH2/CH3/CH4 simultaneous
insert or assemble edit mode of 32 kHz audio,
input signal to audio input connector CH1/CH3
is recorded onto CH1 and CH3 tracks simulta-
neously and input signal to audio input con-
nector CH2/CH4 is recorded onto CH2 and CH4
tracks simultaneously.
ASSEM
ASSEM
INS V
INS VA
INS A
INS A1
INS A2
INS TC
INS VA1
INS VA2
Yes
Yes
Yes
Yes
No
No
Yes
No
No
VIDEO
VIDEO
AUD-1
AUD-2
AUD-1
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
AUD-1
AUD-2
TC
*
*
*
*
Edit mode Analog editing
Mode select OSD 48 kHz mode
ASSEM
Edit mode Analog editing
Mode select OSD 32 kHz mode
ASSEM
INS V
INS VA
INS A
INS A12
INS A34
INS TC
INS VA12
INS VA34
VIDEO
VIDEO
AUD-1
AUD-2
AUD-1
AUD-2
VIDEO
AUD-1
VIDEO
AUD-2
AUD-1
AUD-2
TC
*
*
*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
2
2
EDIT
– Editing with an RS-422A/JVC bus edit remote controller –