Filter
Top Products
53
KCABEGAP
EGAPTXEN
FFOEDOMTAEPER
XEDNI.CNUFYEK,
VDA.FEDOMESUAPGNOL
NIM5EMITESUAPGNOL
FFOEMITCERPUKCAB
DN2EDOMVDA.F/LTS
OTUATCELESCNYS
——————]2/1[METSYS———
PLAYBACK
– Repeat playback –
Three types of repeat playback are available for BR-DV6000.
The repeat playback function can be set with REPEAT MODE in the SYSTEM (1/2) Menu screen.
SYSTEM (1/2) menu screen
:Setting:
Ⅵ REPEAT MODE in the SYSTEM (1/2) Menu screen
OFF : No repeat playback.
INDEX : Repeat playback between positions where index sig-
nals are recorded.
VIDEO END: Repeat playback from the beginning of the tape to
the position where recording of video signals ends.
TAPE END : Repeat playback from the beginning to the end of
the tape.
:Operation:
1.
Press the REW button to rewind the tape to the beginning.
2.
Press the PLAY button to start playback.
¥ When it reaches the position set at REPEAT MODE, the tape
starts rewinding and plays back again.
Ⅵ To abort the repeat playback function, press the STOP
button.
Repeat operation
INDEX repeat playback
●
If no index signal is de-
tected during playback, the
tape will run until the end.
If no index signal is de-
tected during rewind, the
tape will rewind until the
beginning.
● If the interval between in-
dex signals is less than
one minute, the function
may not work well.
Memo
If the head is dirty, repeat
playback may not work
well.
TAPE END
VIDEO END
INDEX Playback
Rewind
Index signal Index signal
Beginning of tape End of tape
52
INDEX+1
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET INDEX+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
INDEX–
Mini
BR-DV6000
PROFESSIONAL
MENU RESET
DISP
SET INDEX+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
INDEX–
Mini
BLANK SEARCH
PLAYBACK
– Search function –
Index search
This function searches to the position where the index signal is recorded.
:Setting:
Set “;, :
” KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
:Operation:
Ⅵ To search an index point in the forward direction from
the current tape position:
• Press the INDEX + button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ To search an index point in the reverse direction from
the current tape position:
• Press the INDEX – button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
Ⅵ When the INDEX + or INDEX – button is pressed, the
unit fast-forwards or rewinds to the specified indexed
position and start playing.
This function searches unrecorded parts of the tape.
Index search progressing:
displayed on the screen
(The number denotes the
corresponding index position.)
Monitor screen
Memo
● If the interval between index signals is less than one minute, the
function may not work well.
● The specifications for index signal recording varies with the device
used.
Monitor screen
Ⅵ In the STOP mode, press the BLANK button.
¥ • If the current position is at a recorded part of the tape, BR-
DV6000 fast-forwards until an unrecorded part is reached
and stops there.
•If the current position is an unrecorded part of the tape, BR-
DV6000 will first advance the tape in the forward direction
for confirmation and thereafter rewind and go into the STILL
mode at the last recorded position.
•During a blank search, “BLANK SEARCH” is displayed on
the monitor.
Blank search
BLANK button
INDEX–
button
INDEX+
button