Filter
Top Products
FACP Configuration Templates Input-to-Output Circuit Mapping and Cross-Zone Operation
108 MRP-2001 & MRP-2001E PN 53040:A 4/16/2007
APPENDIX B FACP Configuration Templates
The MRP-2001/E has been provided with preprogrammed templates which allow the user to
quickly configure the FACP [refer to "FACP CONFIG (Application Templates)" on page 50]. The
user also has the option to reprogram selected portions of the template for customized applications.
The following pages of this appendix describe the programming for each of the templates.
Note: MRP-2001/E Pre-Action/Deluge Control Panel can be configured using preprogrammed
Templates 7 through 13 only. Template 7 is the factory default template for the FACP.
(Templates 1 through 6 are not available for this panel.)
Important! Each Template has been programmed with specific Input Zone Types and Output
Circuit Types. If the FACP is configured with one of the preprogrammed Templates, the user must
ensure that the devices connected to each Input Zone and Output Circuit are compatible with the
programmed types. (The user can reprogram the circuit types if desired).