2-34
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2 Shelf Management Commands
cnftime
cnftime
Configure Time
Configures the time for the node. To see the time after you execute cnftime, use dspdate. The system
displays the time in 24-hour format.
Note Configure a time zone through cnftmzn and optional GMT offset through cnftmzngmt before you
configure the time through cnftime.
Cards on Which This Command Runs
PXM45
Syntax
cnftime <hh:mm:ss>
Syntax Description
Related Commands
cnfdate, cnftmzn, dspdate
Attributes
Example
Set time for 2 PM. plus 11 minutes and 22 seconds.
excel.1.3.PXM.a > cnftime 14:11:22
hh:mm:ss The format for time specification is:
• hh is the hour in the range 01–24.
• mm is the minute in the range 01–60.
• ss is the second in the range 01–60.
Log: log State: active Privilege: SUPER_GP
