9-70
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9 Troubleshooting Commands
dspcds
dspcds
Display Cards
Displays high-level information for all the cards in the node. For more detailed information about a card,
execute dspcd on the CLI of that card. The information that dspcds provides is the:
• Revision level of the boot firmware
• Revision level of the system software
• Date and time of command execution, including GMT offset
• Backplane serial number and its hardware revision level
• The IP address of the statistics master (a workstation)
• Type of card in the front and back slots and the (active/standby) state of each
• Alarm status for each card and the shelf itself
• Redundancy configuration for each slot
Cards on Which This Command Runs
PXM45
Syntax
dspcds
Related Commands
dspcd, version
Attributes
Log: no log State: active, standby, init Privilege: ANYUSER
