5-122
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands
dsppnni-timer
Related Commands
cnfpnni-timer
Attributes
Hello inactivity
factor
The Hello inactivity factor figures in the generation of a time period that
a neighbor is considered alive after the local receives the last Hello
packet from that neighbor. This period is in seconds and is the product of
the hello-inactivity-factor and the peer-neighbor hello-interval.
PTSE lifetime factor The value for the lifetime multiplier is a percentage. The switch uses it to
generate the initial value for the remaining lifetime of a self-created
PTSE. This remaining lifetime is the product of the PTSE lifetime factor
and the PTSE-refresh-interval.
Retransmit int The number of seconds between re-transmissions of unacknowledged
DS, PTSE request, and PTSP.
AvCR proportional PM The proportional multiplier is a percent that used in the algorithms that
determine significant change for AvCR parameters.
CDV PM multiplier The proportional multiplier is a percent that is used in the algorithms that
determine significant change for peak-to-peak cell delay variation
(CDV).
AvCR minimum
threshold
The minimum threshold is a percent that is used in the algorithms that
determine significant change for AvCR parameters.
CTD PM multiplier This proportional multiplier is a percent that is used in the algorithms that
determine significant change for cell transfer delay (CTD) parameters.
Peer delayed ack int The minimum interval between transmissions of delayed PTSE
acknowledgment packets appears as 100-millisecond increments.
Units: 100 ms.
Logical horizontal link
inactivity time
The value of -horizontalLinkInactivityTime. The current release does
not support this parameter. ??
Log: nolog State: active, standby Privilege: ANYUSER
