5-52
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands
delpnni-summary-addr
delpnni-summary-addr
Delete PNNI Summary Address—delete a PNNI summary address from the node.
The delpnni-summary-addr command deletes a PNNI summary address for a PNNI node.
Cards on Which This Command Runs
PXM45
Syntax
delpnni-summary-addr <node-index> <address-prefix> <prefix-length>
Syntax Description
Related Commands
addpnni-summary-addr, dsppnni-summary-addr
Attributes
Example
Delete a summary address, as follows:
• The node index is 1.
• The node address prefix is 47.0091.8100.0000.0030.9409.f1f1.
• The length of the address prefix is 104 bits.
If necessary, use dsppnni-summary-addr to confirm the deletion.
SanJose.7.PXM.a > delpnni-summary-addr 1 47.0091.8100.0000.0030.9409.f1f1 104
SanJose.7.PXM.a >
node-index In the current release, the only supported value for node-index 1. The node index
indicates the relative level of the logical node within a multi-peer group on the
switch. The range is 1–10, and the lowest level is 1.
Range: 1–10
Default: 1
address-prefix The PNNI summary address.
Default: none
prefix-length The length of the address-prefix in bits is less than or equal to 152. In the current
release, the zero-length PNNI summary address is not supported.
Default: none
Log: log State: active Privilege: SUPER_GP
