9-25
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9 Troubleshooting Commands
clrxbarerrcnt
clrxbarerrcnt
Clear Crossbar Error Count—clear the counters for crossbar errors.
To see the errors that clrxbarerrcnt clears, execute dspxbarerrcnt. The clrxbarerrcnt command clears
the errors for either a specific switch plane or all the switch planes on the active switching card. In the
MGX 8850 node, the switching slot is the slot number of the PXM45.
Cards on Which This Command Runs
PXM45
Syntax
clrxbarerrcnt < * | [ slot plane ]>
Syntax Description
Related Commands
dspxbarerrcnt, cnfxbarerrthresh, dspxbarerrthresh, dspswalms
Attributes
Example
Clear the errors for switch plane 0 in slot 7. The system returns no messages unless an error exists in the
command syntax. To see the results, execute dspxbarerrcnt.
pop20two.7.PXM.a > clrxbarerrcnt 7 0
* Enter an asterisk to clear all crossbar errors on the active PXM45.
slot The slot number of the crossbar planes. The slot number is 7 or 8.
plane The range for plane numbers is 0–2.
Log: log State: active, standby Privilege: SUPER_GP
