3-14
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 3 Equipment and Resource Provisioning
addpart
Example
Create a resource partition with the following parameters:
• Logical port 4 (already created by executing addport)
• Partition number 4
• Controller ID 2 (the reserved ID for PNNI)
• 10% of the bandwidth in the egress and ingress directions reserved for this partition
• The range for VPIs is 10–110, the range for VCIs is 100–2000
• Minimum guaranteed connections is 100, maximum number of connections is 500
MGX8850.3.AXSM.a > addpart 4 4 2 100000 100000 100000 100000 10 110 100 2000 100 500
Check the configuration with dspparts and dsppart.
MGX8850.3.AXSM.a > dspparts
if part Ctlr egr egr ingr ingr min max min max min max
Num ID ID GuarBw MaxBw GuarBw MaxBw vpi vpi vci vci conn conn
(.0001%)(.0001%)(.0001%)(.0001%)
-----------------------------------------------------------------------------
4 4 2 100000 100000 100000 100000 10 110 100 2000 100 500
MGX8850.3.AXSM.a > dsppart 4 4
Interface Number : 4
Partition Id : 4 Number of SPVC: 0
Controller Id : 2 Number of SPVP: 0
egr Guaranteed bw(.0001percent): 100000 Number of SVC : 0
egr Maximum bw(.0001percent) : 100000
ing Guaranteed bw(.0001percent): 100000
ing Maximum bw(.0001percent) : 100000
min vpi : 10
max vpi : 110
min vci : 100
max vci : 2000
guaranteed connections : 100
maximum connections : 500
