![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/81/6812bfb6-3f47-41b5-aa4a-2081ad189b9b/6812bfb6-3f47-41b5-aa4a-2081ad189b9b-bg188.png)
5-98
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands
dsppnni-ptse
scope The UNI 4.0 address scope.
Note The current release does not support UNI 4.0, so the
scope is ‘0’.
address info length The length of the address information—an eight-bit number.
address count The number of reachable addresses—a 16-bit number.
reachable address prefixes Display any PNNI summary address reachable by the node. The
length of addressprefix is set by prefixlength.
External Reachable ATM Address IG Parameters
Note The current release does not support exterior reachable addresses.
type The ASCII string that indicates the type of the exterior reachable
ATM address IG parameters.
length A 16-bit number.
flags A string of 8-bit flags.
port id The logical port number of the PNNI port. This format is a 32-bit
number.
Range: 1–2147483648
scope An 8-bit number.
address info length An 8-bit number.
The current release does not support exterior reachable addresses.
address count A 16-bit number.
reachable address prefixes Display any exterior PNNI summary address reachable by the node.
The length of addressprefix is set by prefixlength.
Horizontal Links IG Parameters
type The ASCII string that indicates the type of the horizontal link IG
parameters.
length A 16-bit number.
flags A string of 8-bit flags.