7-34
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7 SPVC and SVC Commands
dncon
dncon
Down Connection
Administratively deactivates (or “downs”) so you can modify or troubleshoot the network. This
operation applies to only SPVCs. To reactivate the connection, use upcon.
Cards on Which This Command Runs
AXSM
Syntax
dncon
<
ifNum>
<vpi>
<vci>
Syntax Description
Related Commands
upcon
Attributes
ifNum
The logical port number. The range for AXSM is 1–60.
vpi Virtual path identifier. On a UNI, the range is 0–255. On an NNI, the range is 0–4095.
vci For a virtual connection (VCC) on a UNI, the range is 1–4095. On an NNI or VNNI,
the VCI range is 32–65535. For MPLS, the recommended minimum VCI is 35.
For a virtual path connection (VPC), the VCI is always 0.
Log: log State: active Privilege: GROUP1
