6-75
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6 Logical Node, Port, and Signaling Commands
dspnodalcongflags
dspnodalcongflags
Display Nodal Congestion Flags
The dspnodalcongflags command displays congestion flags maintained at the CCM at the node level.
Cards on Which This Command Runs
PXM45
Syntax
dspnodalcongflags
Related Commands
dspintfcongflags
Attributes
Example
Display the node-level congestion flags.
Geneva.7.PXM.a > dspnodalcongflags
Parameter Value
===================================
memflg FALSE
ipcflg FALSE
sarflg FALSE
remstatenqflg FALSE
incompjournalingflg FALSE
setupflg FALSE
connpendingflg FALSE
connswitchoverflg FALSE
conntrfparmflg FALSE
conntrfabrflg FALSE
Nodal Congestion Action Flags are
Parameter Value
===================================
dropsetupflg FALSE
dropestabflg FALSE
queuerel FALSE
markcallsforrelflag FALSE
pacevsiresyncflg FALSE
pacestatenqflg FALSE
speedjournalflg FALSE
pacepnniroutecalflg FALSE
lowersetupthflg FALSE
Geneva.7.PXM.a >
Log: nolog State: active, standby Privilege: ANYUSER
