TABLES
xix
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Table 1 MGX 8850 Switch Release 2 Related Documentation xxiii
Table 2 WAN CiscoView for MGX 8850 Release 2 Related Documentation xxiii
Table 3 Cisco WAN Manager Release 10 Related Documentation xxiv
Table 1-1 Valid Line Numbers and Number of Bays for AXSM Card Types 1 - 4
Table 1-2 Maximum Connections by Connection Type and Front Card 1 - 5
Table 1-3 Maximum Connections on Back Cards and Lines 1 - 5
Table 1-4 Mapping PNNI Port ID to AXSM Elements 1 - 6
Table 1-5 Commands 1 - 7
Table 2-1 Valid Line Numbers and Number of Bays for AXSM Card Types 2 - 2
Table 2-2 Maximum Connections by Connection Type and Front Card 2 - 3
Table 2-3 Maximum Connections on Back Cards and Lines 2 - 3
Table 2-4 Mapping PNNI Port ID to AXSM Elements 2 - 4
Table 2-5 Single-Card Upgrade From 2.x to 2.y 2 - 6
Table 2-6 Redundant Pair Upgrade From 2.x to 2.y 2 - 7
Table 2-7 Single-Card Upgrade From 2.x to 2.y 2 - 39
Table 2-8 Redundant Pair Upgrade From 2.x to 2.y 2 - 40
Table 2-9 Reasons for Change of Clock State 2 - 52
Table 2-10 Single-Card Upgrade From 2.x to 2.y 2 - 75
Table 2-11 Redundant Pair Upgrade From 2.x to 2.y 2 - 76
Table 2-12 Single-Card Upgrade From 2.x to 2.y 2 - 83
Table 2-13 Redundant Pair Upgrade From 2.x to 2.y 2 - 84
Table 3-1 Valid Line Numbers and Number of Bays for AXSM Card Types 3 - 2
Table 3-2 Maximum Connections by Connection Type and Front Card 3 - 3
Table 3-3 Maximum Connections on Back Cards and Lines 3 - 3
Table 3-4 Mapping PNNI Port ID to AXSM Elements 3 - 4
Table 4-1 Mapping PNNI Port ID to AXSM Elements 4 - 3
Table 5-1 Valid Line Numbers and Number of Bays for AXSM Card Types 5 - 4
Table 5-2 Mapping PNNI Port ID to AXSM Elements 5 - 5
Table 5-3 Routing Criteria and Service Classes 5 - 87
Table 6-1 Valid Line Numbers and Number of Bays for AXSM Card Types 6 - 3
Table 6-2 Maximum Connections by Connection Type and Front Card 6 - 3
