3-53
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 3 Equipment and Resource Provisioning
dspbecnt
dspbecnt
Display Bit Error Count
The dspbecnt command lets you display the APS-related bit error counters.
Cards on Which This Command Runs
AXSM
Syntax
dspbecnt <working-bay.line>
Syntax Description
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, dspapsbkplane, dspbecnt
Attributes
working-bay.line Identifies the bay (1 or 2) and the number of the line. The line number is from
1 to the highest numbered line on the back card. For the range of line
numbers on specific AXSM models, see Table 3-1.
Log: no log State: active Privilege: ANYUSER
