A SERVICE OF

logo

1-16
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 1 Command Line Interface Overview
cp
cp
Copy
Use cp to copy a file to a new file on the disk on the PXM45-HD. This command is the same as the copy
command.
Cards on Which This Command Runs
PXM45
Syntax
cp <source file name> <destination file name>
Syntax Description
Related Commands
cd, ls, rm, pwd, rename
Attributes
Example
Create a new firmware file without the images suffix by copying the file named pxm_1.0.00Ef.fw to
pxm_1.0.00.fw.
MGX8850.8.PXM.a > cp pxm_1.0.00Ef.fw pxm_1.0.00.fw
source file name The name of the file you intend to copy.
destination file name The name of the new file resulting from cp or the name of the existing file that
is over-written as a result of cp.
Log: log State: active, standby, init Privilege: GROUP1