7-56
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7 SPVC and SVC Commands
upcon
upcon
Up Connection—bring a connection back into service.
Activate a connection that was previously downed by the dncon command. The typical use of dncon is
some form of operational modification or troubleshooting.
Cards on Which This Command Runs
AXSM
Syntax
upcon <ifNum > <vpi> <vci>
Syntax Description
Related Commands
dncon
Attributes
ifNum
The logical port number. The range for AXSM is 1–60.
vpi Virtual path identifier. On the AXSM, the range is 0–255.
vci Virtual connection identifier. On t he AXSM, the range is 32–65535 for a VCC. For
a VPC, the only vci is 0.
Log: log State: active Privilege: GROUP1
