A SERVICE OF

logo

9-45
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9 Troubleshooting Commands
dbgcon
dbgcon
Debug Connectionenables or disables logging of SPVC-related errors.
Enable or disable the SPVC log.To see whether the SPVC log is enabled, use dspcons-dbg.
Cards on Which This Command Runs
PXM45
Syntax
dbgcon
<enable | disable>
Syntax Description
Related Commands
dspcons-dbg
Attributes
Example
Enable the SPVC log.
MGX8850.8.PXM.a > dbgcon enable
enable | disable Enable or disable the SPVC log. Type the entire word. The default is disabled.
Log: no log State: active, standby Privilege: SERVICE_GP