6-65
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6 Logical Node, Port, and Signaling Commands
dspaddr
dspaddr
Display Address
The dspaddr command displays ATM addresses and associated information for a UNI or IISP. For
details on the displayed items, see the addaddr description. The items in the display are as follows:
• ATM addresses on the port and the length of each
• Address plan
• The type of address—internal or external
• The protocol for advertising the address
• The choice for address distribution
• The scope—applicable to multi-peer groups only
Cards on Which This Command Runs
PXM45
Syntax
dspaddr <portid>
Syntax Description
Related Commands
addaddr, deladdr
Attributes
Examples
Display the ATM address and other details for port 3:1.1:1.
8850_NY.8.PXM.a > dspaddr 3:1.1:1
47.0091.8100.0002.0003.6b5e.30c0
length: 104 type: internal proto: local
scope: 0 plan: nsap_icd redistribute: false
8850_NY.8.PXM.a >
portid The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page 6-4.
Log: nolog State: active, standby Privilege: ANYUSER
