Filter
Top Products
Removing a fan and communications module
Complete the following steps to remove a fan and communications module:
1. Using a flat-blade screwdriver, loosen the two captive screws on the fan and
communications module.
2. Lift up and pull out on the pull handle to slide the module out of the slot a few
inches, as shown in Figure 18 on page 37.
3. Grasp the sides of the module with both hands and pull it from the chassis.
4. Place the module on a level surface.
Figure 17. Power supply removal
36 IBM TotalStorage DS4500 Fibre Channel Storage Subsystem: Installation, User’s, and Maintenance Guide