Filter
Top Products
6
Setup and Connections
The Jacks on the Back of the DVD Player (listed
alphabetically)
AC IN – Insert the AC power cord into the DVD Player and plug the other end into an AC outlet.
AUDIO OUT R and L – Insert audio cables (left and right) to these jacks on your DVD Player and to the
corresponding Audio Input jacks (left and right) on your TV or receiver.
DIGITAL AUDIO OUT – Use a digital optical cable (not provided) to connect your DVD Player to a compatible Dolby
Digital receiver or decoder. Dolby Digital offers theater-quality sound (six channels).
PHONE JACK – Insert one end of the telephone line cord into this jack and insert the other end into one of the jacks
on the telephone jack splitter. Insert the telephone jack splitter into a telephone jack. You must connect the telephone
line cord in order to use Divx features.
RF ADAPTER – Use coaxial cables to insert an RF Adapter (not provided) into this jack and to the Antenna Input Jack
on your TV. An RF Adapter is needed if your TV doesn’t have Audio/Video Input jacks. See p. 8 for connection
instructions.
S-VIDEO – If your TV has an S-Video jack, you can connect an S-Video cable to your TV and to your DVD Player for
increased video quality. The S-Video cable only carries the picture signal; remember to connect the left and right
audio cables.
VIDEO OUT - Connect a video cable to this jack and to the Video Input jack on your TV.
VIDEO OUT
R
AUDIO OUT
RF ADAPTER
AC IN
PHONE
JACK
DIGITAL
AUDIO
OUT
L
S-VIDEO
S-VIDEO
VIDEO
OUT
R (right) and L
(left) AUDIO OUT
DIGITAL
AUDIO OUT
RF ADAPTER
PHONE
JACK
AC IN
Important Information About the Pictures used in the Connections
The Audio/Video cables that came with your DVD Player are bundled together.
For better visibility, we’ve shown each cable (audio left, audio right, and video)
separately in the connections pictures that follow.