Filter
Top Products
4
Setup and Connections
The Telephone Jack Splitter Makes
it Easy to Keep Your DVD Player
Connected without Interrupting
Routine Phone Use
You must connect the telephone line
cord to your DVD Player and to a
telephone jack in order to use all of the
Divx features.
We’ve provided a telephone jack splitter
so you can keep your DVD Player and
your phone connected to the phone jack
all the time.
Insert the splitter into the phone jack.
Insert the telephone line cord from your
phone into one of the splitter’s jacks and
insert the telephone line cord from your
DVD Player into the other jack on the
splitter.
Unpack the Box
Carefully unpack the items in the box:
• DVD player
• Remote control and batteries
• Audio/Video cables
• S-Video cable
• Power cord
• Telephone line cord
• Telephone jack splitter (2-in-1 Modular Adapter)
Install Batteries in the Remote
1. Open the battery door on the back of the remote.
2. Insert fresh batteries. Make sure that the polarities
(+ and –) are aligned correctly.
3. Replace the battery door.
Important Battery Information
• If you’re not going to use the remote for a month or more, be
sure to remove the batteries because they can leak and cause
damage.
• Dispose of batteries in the proper manner, according to federal,
state, and local regulations.
• Any battery may leak electrolyte if mixed with a different battery
type, if inserted incorrectly, if all batteries are not replaced at the
same time, if disposed of in fire, or if an attempt is made to
charge a battery not intended to be recharged.
• Discard leaky batteries immediately. Leaking batteries can cause
skin burns or other personal injury.
Telephone
line cord to
DVD player
Telephone
line cord to
your telephone
Plug into
phone jack