10
Setup and Connections
Please Read This Before Using the
DIGITAL AUDIO OUT Jack!
This player’s digital output jack is
designed for a connection to a Dolby
Digital or DTS receiver or decoder.
Older digital equipment may not be
compatible with the Dolby Digital
bitstream. Such a connection can create
a high level of noise that may be harmful
to your ears, and could damage
headphones or speakers.
It is important to choose the correct
setting in the DVD Player’s Setup menu,
especially when you use the DIGITAL
AUDIO OUT jack.
If you are connecting your DVD Player
to a Dolby Digital receiver, choose the
Dolby Digital setting in the Audio
Equipment menu (within the Setup
menu). If you’re connecting your DVD
Player to a DTS receiver or decoder,
choose the DTS setting in the Audio
Equipment menu. For more information,
see Audio Equipment menu information
on p. 60.
Remove the Plastic Covers
If you’re using the DIGITAL AUDIO
OUT jack, check to see if there is a
protective cover inside of the jack and
on the ends of the optical digital cable.
You must remove these protective
covers before inserting the optical
digital cable into the jack.
Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation
DTS is a registered trademark of Digital Theater Systems
DVD Player + TV + Dolby Pro Logic or Dolby Digital or DTS Receiver
To Connect the DVD Player
1. Connect the left and right audio cables to your audio/video
receiver and to the AUDIO OUT L (left – white) and R (right – red)
jacks on the back of your DVD Player.
2. If you have a Dolby Digital or DTS receiver, insert an optical digital
cable (not provided) to the DIGITAL AUDIO OUT jack on the
DVD Player and to the Digital Input jack on the back of the
receiver. You must also set the Audio Equipment setting in the
Setup menu to the correct setting (Dolby Digital or DTS – see p. 60
for more information).
3. Connect the video cable to the VIDEO OUT jack on your DVD
Player and to the Video Input jack on your TV.
If your TV has an S-Video jack, connect the S-Video cable to the S-
VIDEO jack on your DVD Player and to the S-Video jack on your
DVD Player. If your TV doesn’t have an S-VIDEO jack, don’t
connect the S-Video cable.
4. If the telephone line cord packed with your DVD Player has a filter
attached to one end of the cord, insert that end of the telephone
line cord into the PHONE JACK on the back of your DVD Player.
Plug the other end into the telephone line splitter (provided), and
insert the telephone line splitter into a phone jack.
If the telephone line cord doesn’t have a filter attached to it, just
insert one end into the DVD Player’s PHONE JACK and insert the
other end into the telephone line splitter. Insert the telephone line
splitter into a phone jack.
5. Connect the AC power cord to the AC IN jack on the back of your
DVD Player, and plug the other end into an AC outlet.
6. Turn on your TV.
7. Turn your TV to the Video Input Channel. (If you don’t know what
channel is the Video Input Channel, please see p. 14).
8. Turn on your DVD Player.
Dolby Digital and DTS
Both Dolby Digital and DTS are audio formats used to record
5.1-channel, audio signals onto the digital track of film. Both of these
formats provide six separate channels: left, right, center, left rear, right
rear, and common subwoofer.
Remember, the disc will only play 5.1-channel sound if you’ve connected a
DTS or Dolby Digital receiver or decoder and if the disc was recorded in the
Dolby Digital or DTS format.