Filter
Top Products
Switch Management
89Web Tools Version 3.1.x/4.1.x User Guide
Using HA Admin
The following sections show how to access the HA Admin interface, how to use it
to synchronize services on the CP, and how to initiate a CP failover.
Accessing the HA Admin Interface
Perform the following steps to access the HA Admin interface.
1. Launch the web browser.
2. Enter the IP address in the Location/Address field and press Enter.
Example:
http://123.123.123.123
Web Tools launches, displaying Fabric Tree.
3. Click a switch in the Fabric Tree.
The Switch graphic appears.
4. Click the Hi Avail icon on the switch panel.
The HA Admin window appears as shown in Figure 17.
Synchronizing Services on the CP
A non-disruptive CP Failover is only possible when all the services have been
synchronized. To synchronize the services perform the following:
1. Launch the web browser.
2. Enter the IP address in the Location/Address field and press Enter.
Example:
http://123.123.123.123
Web Tools launches, displaying Switch Explorer View.
3. Click a switch in the Fabric Tree.
The Switch graphic appears.
4. Click the Hi Avail icon on the switch panel.
The HA Admin window appears as shown in Figure 17.
5. Verify that HA Summary field displays Non-Disruptive Failover Ready.