Filter
Top Products
Fabric Watch
182 Web Tools Version 3.1.x/4.1.x User Guide
Setting the Behavior Type of an Alarm
1. Launch Fabric Watch (see “Launch Web Tools.” on page 173).
2. Select the Threshold Configuration tab.
3. Select the Element Configuration sub-tab.
4. Select a previously configured element from the navigation tree (see
“Configuring Boundary and Alarm Settings” on page 181).
5. Select the alarm area to be configured from the Area drop-down menu.
6. Select the Element Configuration sub-tab.
7. Select the alarm Element to be configured from the Select Element drop-down
menu.
8. Select the Continuous or Triggered radio buttons (see Table 43 on page 179
for descriptions).
9. Click the Apply button.
View an Alarm Configuration Report
1. Launch Fabric Watch (see “Launch Web Tools.” on page 173).
2. Select the Threshold Configuration tab.
3. Select the Configuration Report sub-tab.
4. Select a previously configured element from the navigation tree (see
“Configuring Boundary and Alarm Settings” on page 181).
5. Select the alarm area report to be viewed from the Area drop-down menu.
6. Select the Configuration Report sub-tab.