Filter
Top Products
Zone Administration
237Web Tools Version 3.1.x/4.1.x User Guide
Using the Fabric Assist Tab
The functions provided on the Fabric Assist tab are shown in the following
sections.
Creating a Fabric Assist Zone
For this example, the Mixed Zone level is used.
1. Access the Zone Administration window; see “Accessing the Zone
Administration Window” on page 204.
The Zone Administration window appears.
2. Enter the admin level user name and password.
3. Select View > Mixed Zoning. You can select any view except the Device
View.
The Mixed View tab appears.
4. Select the Fabric Assist tab.
5. Select the Create button.
The Create New FA dialog box appears.
6. Enter a name for the new FA zone and Click the OK button.
A fabric host is required.
7. Highlight the desired Fabric Assist zone members from the Member Selection
list.
8. Click the Add Member button.
The new members appear in the Fabric Assist Members window.
The newly created FA zone also appears in the Config tab.
Modifying the Members of a Fabric Assist Zone
To modify the members of a Fabric Assist Zone, perform the following steps:
1. Access the Zone Administration window.
See “Accessing the Zone Administration Window” on page 204 for more
information.
2. Select the Fabric Assist tab.