Filter
Top Products
Switch Admin Window
119Web Tools Version 3.1.x/4.1.x User Guide
4. Select the desired speed for the corresponding port (see “About the Port
Setting Tab” on page 115).
5. Click the Apply button.
Assigning a Name to a Port
You can optionally name a port by performing the following steps.
1. Access the Switch Admin Window (see “About the Switch Admin Window”
on page 92).
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Click in the Name column; select the field that corresponds to the Port you
want to name.
5. Enter a name for the port. Port names can be from 0 to 32 alphanumeric
characters. Port names do not need to be unique.
6. Click the Apply button.
Disabling a Port over Reboots
To optionally disable a port, so that it is disabled over reboots perform the
following steps.
1. Access the Switch Admin Window (see “About the Switch Admin Window”
on page 92).
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Select the slot and port you want to disable over reboots.
5. Check the Persistent Disable checkbox for that port.
6. Click the Apply button.