Filter
Top Products
Fabric Management
196 Web Tools Version 3.1.x/4.1.x User Guide
Name Server column descriptions are in Table 50.
Table 49: Name Server Description of Fields and Buttons
Field Description
Auto Refresh Check to enable Auto Refresh or uncheck to disable.
Auto Refresh
Interval
If Auto Refresh is checked, enter the number of seconds for
the refresh interval.
Number of Devices Displays the number of devices in the fabric.
Refresh Select to refresh the window immediately.
Print Select to print the Name Server table.
Close Select to close the window.
Table 50: Name Server Description of Columns
Column Description
Domain # Displays the domain ID of the switch to which the device is
connected.
Port # Displays the number of the switch port to which the device is
connected.
Port Name Displays the name of the port.
Port ID Displays the port ID of the device (24-bit hexadecimal value).
Port Type Displays the port type of the device (N for fabric direct
attached port or NL for fabric direct attached loop port).
Fabric Port WWN Displays the worldwide name of the fabric port.
Device Port WWN Displays the worldwide name of the device port.
Device Node
WWN
Displays the worldwide name of the device node.
Device Name Displays the symbolic name of the device assigned through
the SCSI INQUIRY command.
FC4 Types Displays the Fibre Channel FC4 layer types supported by the
device, such as IP or FCP.
COS Displays the Fibre Channel classes of service supported by
the device.
Fabric Port Name Displays the name of the fabric port in use by the device.