Filter
Top Products
Switch Admin Window
105Web Tools Version 3.1.x/4.1.x User Guide
Table 20: Upload/Download Field Descriptions
Field Descriptions
Function
Firmware Download Select the radio button to download firmware. The Fastboot
After Download option becomes enabled.
Config Upload to
Host
Select the radio button to upload the configuration file to a
specified host. Using this option allows you to save the
configuration file to the switch using the specified filename
(full path). The Username and Password must be valid for the
specified host, and the file path must be read-write capable
by the user. The switch must be disabled for this option to be
available.
Config Download to
Switch
Select the radio button to download a configuration file to
the switch. The Config Download option requires that the
switch first be disabled; it will be set to the original switch
status after the config download is complete. The switch must
be disabled for this option to be available.
Host Details
Protocol Displays the supported downloading protocol: FTP.
Full Install This option is a required value for Firmware Download. A full
install replaces every file rather than only the delta files.
Reboot After
Download
This option is a required value for Firmware Download. This
option automatically reboots the switch after the Firmware
Download is complete.
AutoCommit This option is a required value for Firmware Download. This
option automatically commits the firmware download to both
partitions of a switch or CP in the Core Switch 2/64.
User Name Enter the User Name who owns the firmware package on the
host.
Host IP Enter the IP address of the host.
Password Enter the password of the User who owns the firmware
package on the host.
Filename Enter the file name of the firmware package to be
downloaded.
Download/Upload
Status
Indicates the progress of the firmware download or upload.